Flush mounting, non-vision, pressed steel grille door, partition or wall mounting. Complete with integral rear multi shutter style volume control device operated by face mounted lever.
Constructed from mild steel sheet. Pressed metal louvres are vertical and are angled at 30 degrees left and right of the grille centre.
Available in limited sizes shown below.
Grille only 15kg/m2
Free area approximately 75%
Quick release core provides easy access to rear and concealed fixing facility. Suitable for wall, cill or ceiling mounting.
Integrating with the most popular raised access floor systems. Available in both light and Extra heavy duty grades to BS-EN 13264:2001
For supply or extract air, this heavy duty floor grille has a sturdy 0 degree deflection blades with rear reinforced mullions.
Ideal for commercial or industrial use in areas of possible impact such as schools or gyms. Suitable for wall or ceiling mounting.
For supply or extract, having a single set of fixed linear blades with 0° and 15° deflection options. Suitable for wall, cill or ceiling mounted.
For supply or extract, having a single set of fixed linear blades with 0° and 15° deflection options. Suitable for wall, cill or ceiling mounted.
Complete with rear plenum box and tamperproof rear mounted fixings.
Stainless steel type complies with Home office recommendations for Anti-ligature applications. For supply, air transfer/extract applications.
Designed to accommodate intumescent fire blocks or slimline fire dampers. Robustly constructed for low level mounting requirements.
Flush mounting, non-vision slim-line grille for door, partition or wall mounting. Accommodating intumescent fire blocks or fire dampers.
The channel section core with integral noise absorption material provides an effective solution when transfer ventilation is required.
For air transfer application, the chevron blades provide vision proof conditions. Suitable for door, partitions or wall mounting.
For return air, having a perforated panel core, provides an attractive yet practical finish.
Fixed horizontal vanes at 45 degree provide an element of screening of the duct and damper behind.
For extract of air transfer applications. The neat 15mm deep bevelled frame presents a flush unobtrusive appearance.
When viewed from any off-centre position this Grille has a no-see-through appearance.
For supply, extract or air transfer applications for wall or duct mounting. Blades available with 0, 15 or 35 degree deflection and at 12.5mm centres.
For supply air, having double set of fully adjustable vanes to give directional control of the air pattern in four directions if required.
For supply or extract air, having single set of heavy duty fully adjustable vanes, suitable for low, medium and high velocity installations.
For supply air, having double set of fully adjustable vanes to give directional control of the air pattern in four directions if required.
For supply or extract air, having single set of fully adjustable vanes to give directional control of the air pattern in two directions.
